Mini Brushless Gimbal Control Board, Assembled - 2 Axis, by AlexMos
|
|
||
* 본 제품은 License Fee가 지급된 정품 AlexMos Firmware 탑재 컨트롤보드 제품입니다.
[제품 설명]
브러쉬리스 모터 직접구동(BLDC) 방식의 짐벌/카메라마운트를 제어하기 위한 Control Board 제품입니다. 포함된 자이로 및 가속도 센서를 통해 PID 제어로 Camera Stabilizing을 수행합니다. 기존 서보 방식의 짐벌/카메라 마운트 대비 빠르고 정확한 보정을 수행하여 고품질의 영상을 얻을 수 있도록 도와줍니다. * 새롭게 출시된 Mini Size 제품으로 협소한 공간에도 장착 가능하게 되었습니다.
[제품 제원 및 특징]
- 크기: 46 x 30mm (메인 Controller), 16 x 16mm (IMU)
- S/W(Firmware) Ver: v2.3b5, AlexMos
- 46 x 30mm size with 42 x 25.5mm mounting hole pattern for M2 screws
- Onboard
mini-USB
- Access to serial port, so a Bluetooth can also be hooked for easy
tuning.
- L6234 Motor drivers
- Atmega 328P with Alexmos Bootloader
preinstalled
- MPU6050 IMU included
[What's New]
- New option: skip gyro calibraion at startup. With this option checked, board starts working immediately after power ON.
- New menu command and GUI button for manual gyro calibration RC Map, RC Source moved to profiles. It allows to change RC control setting by switching profiles.
- RC YAW axis control may be inverted now by specifying Min.angle > Max.angle, like for other axis (but this setting not used for limiting, just for inverting).
- I2C errors monitoring: LED will blink when I2C error detected
- New option: gyro high sensivity. It doubles sensivity of the gyro, that equals to multiplying gains in the PID controller by 2. It may be usefull for big DSLR cameras.
- The "Firmware Upgrade" tab in the GUI is working now and allows to upload a new firmware.
[매뉴얼, GUI 등 제조사 다운로드 Link]